Repair > Milk Module Repairs (General)
11.12.7 Replace Chassis / Inlet Geometry Handle
1
2
Fig. 117
Prerequisites
• (MCS) Hydraulic unit and PCB assembly are detached → p. 182.
• (PCS) Hydraulic unit and PCB assembly are detached → p. 160.
Procedure
1. Lay the fridge assembly (1) on its side as shown.
2. Pull the chassis (2) upwards and away from the fridge assembly (1) while releasing
the latch (circled in red) to remove the chassis (2).
Version 1.4 EN
Momento 120 Service Manual
151