Replace On/Off Switch - Nespresso Momento 120 Service Manual

Repair > Chassis Repairs

11.10.4 Replace ON/OFF Switch

1
Fig. 53
Prerequisites
• Water tank slot is removed → p. 95.
Procedure
1. Remove the EMC PCB lid → Fig. 46 on p. 93.
2. Unplug the receptacles on the EMC PCB (1) coming from the ON/OFF switch.
1
Fig. 54
3. Loosen 2 screws (TX20) from the switch support (1).
4. Lift the support (1) and wires out of the chassis.
Version 1.4 EN Momento 120 Service Manual 99