4. Press in the latches (see lower detail) on both sides of the water tank slot (1) and
pull it out a bit.
5. Unplug the water level detection wire (see upper detail, red circle) from the back
of the water tank slot (1) as soon as you are able to reach it.
6. Pull off the hose from the from the back of the water tank slot (1).
7. Completely remove the water tank slot (1).
Version 1.4 EN
Repair > Chassis Repairs
Momento 120 Service Manual
Danger of
damage! Do not
pull out the water
tank slot too far
while the water level
detection wires are still
connected.
1
Fig. 51
97