Nespresso Momento 120 Service Manual page 185

Assembly tips
• All connectors are keyed and cannot be plugged wrong.
• When reattaching the hydraulic unit, assemble the drain outlet first.
• Ensure that the PCB assembly is properly snapped in and cannot be moved.
• Use the guide rails and hooks (circled in red) to properly align the hydraulic unit
with the fridge assembly.
• If you are having problems with the alignment of the holes for the two screws, try
to screw in the bottom one first.
take special care to not push or bend any of the copper pipes around the
compressor of the fridge!
Version 1.4 EN
Repair > Milk Module Repairs (Metal Component Support)
Momento 120 Service Manual
Fig. 156
185