Nespresso Momento 120 Service Manual page 108

108
Repair > Chassis Repairs
1
2
3. Unplug the flat receptacle of the grounding wire from the top plate (1).
This kind of flat receptacle has a special connector latching.
Press down the lever with flat nose pliers while pulling on it.
4. Unplug all connectors from the back of the extension PCB (2):
(a) Smart PCB connector
(b) Water level detection connector for 2nd tank
5. Replace the extension PCB (2).
Assembly tip
• Make sure that the connector latch of the grounding wire is locked by slightly
pulling it down.
Momento 120 Service Manual
Fig. 66
Version 1.4 EN