Replace Water Pump - Nespresso Momento 120 Service Manual

11.13.8 Replace Water Pump

1 A
This component and connected pipes are partially under pressure
(→ p. 15), follow the instructions on page 140 in advance!
Prerequisites
• Emptying valve is removed → p. 167.
Procedure
1. Remove the 3 electrical connectors (a+b+c) from the water pump.
2. Remove the tube (A) of the water pump (2) from the boiler (1) in the same way as
an FEP tube.
3. Remove the tube (B)
4. Remove tube (C) from the water coupling (3) in the same way as FEP tubes.
5. Pull the water pump (2) out of its support (4).
Version 1.4 EN
Repair > Milk Module Repairs (Plastic Component Support)
4 2 B 4
Momento 120 Service Manual
Removing FEP
tubes: → p. 142
C 3
Fig. 139
169