11.13.13 Replace Milk Pump
1
A
2
B
Prerequisites
• Hydraulic components support is removed → p. 172.
Procedure
1. Remove the FEP tube (A) coming from the suction nozzle valve (1).
2. Remove the FEP tube (B) of the steam heating chamber (2).
3. Remove the FEP tube (C) coming from the air valve (3).
4. Pull the milk pump (4) out of the hydraulic components support (5).
Version 1.4 EN
Repair > Milk Module Repairs (Plastic Component Support)
3
4
5
Momento 120 Service Manual
Removing FEP
tubes: → p. 142
Fig. 147
177