122
Repair > Coffee Module Repairs
11.11.6 Replace Valve(s)
• The removal procedure for all valves is the same.
• All valves can be replaced without disassembling the coffee module.
1
2
3
4
1. Pull out the connector clips (4) from the hose adapters (3) with pointed pliers.
2. Pull off the hoses (1) with hose adapter (3) from the valve (5).
3. Pull off and discard the O-rings (2) between valve (5) and hose adapter (3).
4. Unplug the flat receptacles from the valve (5).
1
2
5. Release the latch from the valve support (1) with a small flathead screwdriver or
another suitable tool.
6. Remove the valve (2) by tilting it downwards.
Assembly tip
• Always replace the O-ring seated between a valve and a hose adapter.
Momento 120 Service Manual
5
Fig. 80
Fig. 81
Version 1.4 EN