Final Tests - Nespresso Momento 120 Service Manual

204
Final tests > PE Distribution
13 F I n A L t e S t S
A Nespresso technician with special training and test equipment is required for test-
ing the coffee machine after the initial installation at the customer's side.
Required test equipment
• Portable electric safety tester
- for tests according to EN/IEC 60335-1 and applicable national standards,
- equipped with a national power socket and test probe(s).
tests to be carried out
• Protective earth continuity test
• Protective insulation test
• Functional test of the milk module
Danger of electrocution!
Mains voltage inside the coffee machine.
Do not touch any live part while performing these tests.
Read and observe the safety instructions in the user manual of the test
equipment.
the metal surface at a test point can oxidise. Scratch the metal surface
with the tip of the test probe to achieve a good electrical contact.
Momento 120 Service Manual Version 1.4 EN