142
Repair > Milk Module Repairs (General)
11.12.1 Removing FEP Tubes
Most tubes in the milk module are connected with quick-acting fasteners. Follow this
instructions to release or fasten a tube in the procedures for the milk module repairs
hereafter.
1
1. Using a fork wrench no. 6 or your fingers, push in the fastener's head (1).
2. Pull out or insert a tube with special tube pliers (2) or by hand.
3. Release the fastener's head (1).
When inserting a tube, two noticeable resistances must be overcome.
Always ensure a firm connection!
The tubes must never get kinked or clamped between housing parts.
Momento 120 Service Manual
1
2
Fig. 106
Version 1.4 EN