8.2.2 Cleaning of FEP Tubes and T-Connector
1
Prerequisites
• Hydraulic unit and PCB assembly are detached → p. 182.
Procedure
1. Remove the FEP tube (1), (2), (3) and the T-Connector (A).
2. Flush the FEP tube (1), (2), (3) and the T-Connector carefully with water.
Version 1.4 EN
Troubleshooting
Momento 120 Service Manual
Removing FEP
tubes: → p. 142
2
A
3
Fig. 21
53