Technician Menu; Set Agent Code; Milk Module Diagnostics - Nespresso Momento 120 Service Manual

6.4 technician Menu

1) Set access code
2) Copy log on SD card
3) Save/load configuration locally
4) Save/load configuration on SD card
5) Set tower link
6) Set cup heater
7) Set direct water connection
8) Set cabinet threshold
9) Change external filter
10) Set agent code: → p. 39
11) Milk module diagnostic: → p. 39
12) Milk Pump Calibration: → p. 41
13) Upgrade machine software: → p. 42
14) Component maintenance status: → p. 43
15) Set cold recipes menu item → p. 27

6.4.1 Set Agent Code

The agent code list is updated and available for download on the "INFOTECH" section
of the Nestlé Nespresso business extranet https://business.nespresso.com.
please enter
your agent code
1. Enter the agent code and tap on the
"confirm" symbol.

6.4.2 Milk Module Diagnostics

milk module diagnostic
cleaning valve
milk pump
1. Press the "next" symbol to scroll
through the components.
2. Select the circle next to a compo-
nent to enter the corresponding
diagnostic screen.
Version 1.4 EN
MMI Menus > Technician Menu
confirm your agent code
2. Confirm the agent code by tapping
the "confirm" symbol again.
milk module diagnostic
steam pressure 2.0820 bar
boiler temperature 133.5937 °C
NTC in fluid line 50.4687 °C
fridge temperature 6.4414 °C
milk temperature 4.8437 °C
boiler level
milk level
cleaning tablet
microswitch
fan runs
compressor runs
3. The table "milk module diagnostics"
is shown independently of the
selected component.
4. Pressing and holding the "actuate"
symbol activates the chosen compo-
nent. When the button is released
the component is deactivated and
reset.
Momento 120 Service Manual
cleaning valve
component when you
are knowledgeable
actuate
about the risks.
Actuator state
changes upon bu on
yes
press and returns to
initial state upon
yes
bu on release
no
yes
no
no
Risk of damage!
Only activate a
39