Nespresso Momento 120 Service Manual page 45

7. Place the cleaning tablet in its fore-
seen position in the cleaning tank.
If cleaning tablet is not inserted,
the cleaning procedure cannot be
started.
10. Place the waste water container
below the outlets. Let the fridge
door open (to avoid condensation in
the milk tank bay).
11. Select ">" to launch the cleaning
procedure and follow the instruc-
tions on the screen.
13. Remove, empty and clean the water
container. Remove the cleaning tank,
remove the lid, empty the tank and
clean both lid and cleaning tank.
Handle the cleaning tank with care
as the cleaning solution is warm and
composed of cleaning agent.
Version 1.4 EN
Maintenance > Clean the Milk Machine (daily)
8. Insert the cleaning tank. The inden-
tation on the cleaning tank lid must
be on the front left side for correct
insertion.
9. Make sure the milk suction pipe is
properly placed into the cleaning
tank.
12. After the cleaning process has fin-
ished, remove the drip tray with the
drip grid from the machine. Empty
the drip tray. Wash with soapy water,
rinse and dry both elements. Insert
the drip tray with the drip grid back
to the machine.
14. Clean the milk suction pipe and the
milk tank bay with a single-use paper
towel or tissue. Check visually that
the filter on the milk suction pipe
is not clogged. If it is, remove the
pipe and clean it with fresh drinking
water.
Momento 120 Service Manual
If the cleaning
procedure is
interrupted for any
reason, it has to be
restarted.
45