Replace Power Supply - Nespresso Momento 120 Service Manual

11.10.5 Replace Power Supply

Prerequisites
• Milk module is removed → p. 90.
• Water tank slot is removed → p. 95.
• Power switch support is removed → p. 99.
• EMC PCB lid is removed → Fig. 46 on p. 93.
Procedure
1. Unplug all receptacles on the EMC PCB (1)
2. Loosen 1 screw (TX20, see detail) on the power supply support (2).
3. Tilt the power supply support (2) upwards on the front and push it back a bit to
release the two support extensions from the chassis (circled in red, see detail
view from the back).
Version 1.4 EN
1
Momento 120 Service Manual
Repair > Chassis Repairs
2
Fig. 57
101