Replace Steam Pressure Regulator - Nespresso Momento 120 Service Manual

Removing FEP
tubes: → p. 142
never try to
adjust the steam
pressure regulator via
the adjustment screw!
It is possible to
replace the steam
pressure regulator
without detaching the
hydraulic unit first.
188
Repair > Milk Module Repairs (Metal Component Support)

11.14.5 Replace Steam Pressure Regulator

1
This component and connected pipes are under pressure (→ p. 15),
follow the instructions on page 140 in advance!
Prerequisites
• (Optional) Hydraulic unit and PCB assembly are detached → p. 182.
Procedure
1. Remove the FEP tubes (A and B) from the steam pressure regulator (1).
2. Remove the steam pressure regulator (1)
Momento 120 Service Manual
A
B
Fig. 159
Version 1.4 EN