Nespresso Momento 120 Service Manual page 135

1
10. Pull out the piston (2) by hand.
11. Pull out the 4 piston springs (1).
12. Clean the piston skirt inside and housing (green area) with a cleaning cloth.
13. Put in the 4 piston springs (1) again.
14. Insert a new piston (2) after greasing all its seals (Molykote 111).
1
15. Insert a new front assembly (1) and tighten the 4 screws (crosshead).
16. Pull the coil connector (2) through the cable guide (red circle) and plug it in (see
detail).
Version 1.4 EN
2
Repair > Coffee Module Repairs
Momento 120 Service Manual
Fig. 97
2
Fig. 98
135