Content Updates - Nespresso Momento 120 Service Manual

Change
New procedure to replace the air valve (mcs)
Updated milk module wiring diagram
Restructuring of milk module repair section:
General procedures for both component support versions
Procedures for the plastic component support (new content)
Procedures for the metal component support (existing content)
Version 1.3
Change
Reworded "Flow Control Valve" to "Air Valve" for consistency
Added more details about the descaling logic (machine blockage)
New procedure for PM to clean DWO tube if machine is used with DWC
Added "Safety Stop Mode" information to the troubleshooting section
Added a new section with functional details for the milk module
Added amperage remark of 10 A to main fuse replacement
Version 1.4
Change
Updated hot foam adjustment procedure and reference scale
Added cold foam adjustment section and reference scale
Added foam quality troubleshooting tips
Removed foam section from MMI menu chapter
Version 1.4 EN

Content Updates

Page N° Requested by
p. 187 THP
p. 202 THP
p. 140 Existing Content
p. 157 THP
p. 179 Existing Content
Page N° Requested by
- Nespresso, THP
p. 51
Nespresso
p. 54 Nespresso
p. 56 Nespresso
p. 65 Nespresso
p. 93
Nespresso
Page N° Requested by
→ p. 29 Nespresso, THP
→ p. 30 Nespresso, THP
→ p. 30 Nespresso, THP
→ p. 33ff Consistency
Momento 120 Service Manual 9