Mounting A Qfx10002 In A Rack; Before You Begin Rack Installation - Juniper QFX10002 Hardware Manual

Table 45: Inventory of Components Supplied with a QFX10002
Component
Warranty
SEE ALSO
QFX10002 Installation Overview | 97

Mounting a QFX10002 in a Rack

IN THIS SECTION

Before You Begin Rack Installation | 101

Four Post Procedure | 103
You can mount QFX10002 models on a four post 19-in. rack using the mounting kit provided with the
switch.
For four post rack installation, the mounting kit contains two front mounting rails with two matching
rear mounting blades. This configuration allows either end of the switch to be mounted flush with the
rack and still be adjustable for racks with different depths.
The front and rear rack rails must be spaced between 28 in. (71.1 cm) and 31 in. (78.7 cm) front-to-back.
This topic describes:
Before You Begin Rack Installation
Before you begin mounting a QFX10002 in the rack or cabinet:
1. Ensure that you understand how to prevent electrostatic discharge (ESD) damage. See
Electrostatic Discharge Damage" on page
2. Verify that the site meets the requirements described in
page 64.
(Continued)
189.
"QFX10002 Site Preparation Checklist" on
101
Quantity
1
"Prevention of