Maintaining Qfx10002 Cooling System Components; Removing A Fan Module From A Qfx10002 - Juniper QFX10002 Hardware Manual

• Connect a fiber-optic cable to an SFP+, QSFP+, or QSFP28 transceiver in a QFX10002 , follow the
instructions in "Connect a Fiber-Optic Cable" on page
• Disconnect a fiber-optic cable from an SFP+, QSFP+, QSFP28 transceiver from a QFX10002 , follow
the instructions in "Disconnect a Fiber-Optic Cable" on page
RELATED DOCUMENTATION
QFX10002 Power System | 50
QFX10002 Cooling System | 45
Maintaining QFX10002 Cooling System
Components
IN THIS SECTION

Removing a Fan Module from a QFX10002 | 122

Installing a Fan Module in a QFX10002 | 124
Use the following procedures to replace a fan module in a QFX10002:
Removing a Fan Module from a QFX10002
Before you remove a fan module from a QFX10002, ensure that you have taken the necessary
precautions to prevent electrostatic discharge (ESD) damage (see
Damage" on page 189).
Ensure that you have the following parts and tools available to remove a fan module from a QFX10002:
• ESD grounding strap
• Antistatic bag or an antistatic mat
137.
136.
"Prevention of Electrostatic Discharge
122