Juniper QFX10002 Hardware Manual page 158

Table 46: QFX10002 Chassis Alarm Messages
Component Alarm Type
Temperature Major (red)
sensors
Minor (yellow)
Routing Engine Minor (yellow)
Major (red)
(Continued)
CLI Message
sensor-location Temp Sensor Fail
sensor-location Temp Sensor Too Hot
sensor-location Temp Sensor Too
Warm
RE number /var partition usage
RE
is high
RE number /var partition is full
RE
Recommended Action
Check the system log for the
following message and report it to
customer support:
sensor-number failed
Temp sensor
sensor-number ranges from
where
1 through 10.
Check environmental conditions
and alarms on other devices. Ensure
that environmental factors (such as
hot air blowing around the
equipment) do not affect the
temperature sensor. If the condition
persists, the device might shut
down.
For information only. Check
environmental conditions and
alarms on other devices. Ensure that
environmental factors (such as hot
air blowing around the equipment)
do not affect the temperature
sensor.
Clean up the system file storage
space on the switch. For more
Cleaning Up the
information, see
System File Storage Space .
Clean up the system file storage
space on the switch. For more
Cleaning Up the
information, see
System File Storage Space .
149
,