Installing And Removing Qfx10002 Hardware Components - Juniper QFX10002 Hardware Manual

Installing and Removing QFX10002 Hardware
Components
The QFX10002 switch chassis is a rigid sheet-metal structure that houses the hardware components.
The field-replaceable units (FRUs) in QFX10002 devices are:
• Power supply
• Fan module
• SFP+ transceiver
• QSFP+ transceiver
• QSFP28 transceiver
All of the QFX10002 FRUs are hot-insertable and hot-removable: you can remove and replace them
without powering off the switch or disrupting switch functions.
CAUTION: Replace a failed power supply with a new power supply within 1 minute of
removal to prevent chassis overheating. Replace a failed fan module with a new fan
within 1 minute of removal to prevent chassis overheating.
For detailed instruction on how to:
• Install a power supply in a QFX10002 , follow the instructions in
QFX10002" on page
• Remove a power supply from a QFX10002, follow the instructions in
from a QFX10002" on page
• Install a fan module in a QFX10002, follow the instructions in
QFX10002" on page
• Remove a fan module from a QFX10002, follow the instructions in
QFX10002" on page
• Install an SFP+, QSFP+, or QSFP28 transceiver in a QFX10002, follow the instructions in
Transceiver" on page
• Remove an SFP+, QSFP+, or QSFP28 transceiver from a QFX10002, follow the instructions in
"Remove a Transceiver" on page
128.
126.
124.
122.
133.
130.
"Installing a Power Supply in a
"Removing a Power Supply
"Installing a Fan Module in a
"Removing a Fan Module from a
121
"Install a