Juniper QFX10002 Hardware Manual page 71

You can get additional information about the status of the power modules using the show chassis power
command. For example:
user@device> show chassis power
PEM 0:
State: Online
Capacity: 1600 W (maximum 1600 W)
DC output: 372 W (zone 0, 31 A at 12 V, 23% of capacity)
PEM 1:
State: Online
Capacity: 1600 W (maximum 1600 W)
DC output: 324 W (zone 0, 27 A at 12 V, 20% of capacity)
PEM 2:
State: Online
Capacity: 1600 W (maximum 1600 W)
DC output: 312 W (zone 0, 26 A at 12 V, 19% of capacity)
PEM 3:
State: Online
Capacity: 1600 W (maximum 1600 W)
DC output: 312 W (zone 0, 26 A at 12 V, 19% of capacity)
System:
Zone 0:
Capacity:
Allocated power:
Actual usage:
Total system capacity: 6400 W (maximum 6400 W)
Total remaining power: 5080 W
RELATED DOCUMENTATION
Connecting the QFX10002 to Ground | 105
Connecting AC Power to a QFX10002 | 110
Connecting DC Power to a QFX10002 | 111
6400 W (maximum 6400 W)
1320 W (5080 W remaining)
1320 W
62