Qfx10002 Clearance Requirements For Airflow And Hardware Maintenance - Juniper QFX10002 Hardware Manual

• The grounding cable that you provide for a QFX10002 must be the same size or heavier than the
input wire of each power supply. Minimum recommendations are 8 AWG (8.4 mm²) stranded copper
wire, 90° C wire, or as permitted by local code.
SEE ALSO
QFX10002 Power System | 50
Connecting the QFX10002 | 105
QFX10002 Clearance Requirements for Airflow and Hardware
Maintenance
When planning the site for a QFX10002 installation, you must allow sufficient clearance around the
installed chassis. See Figure 32 on page
Figure 32: Clearance Requirements for Airflow and Hardware Maintenance for a QFX10002
Follow these guidelines:
69.
69