Juniper QFX10002 Hardware Manual page 115

NOTE: Mount your switch in the rack or cabinet before attaching the grounding lug to the
switch. See "Mounting a QFX10002 in a Rack" on page
Ensure that you have the following parts and tools available:
• Grounding cable and lug, see
68
• Two 10-32 UNF x .25 in. screws with #10 split-lock washer
• Two #10 flat washers
• Phillips (+) number 2 screwdriver
To connect earth ground to a QFX10002:
1. Connect one end of the grounding cable to a proper site earth ground, such as the rack in which the
switch is mounted.
2. Place the grounding lug, which is attached to the grounding cable, over the protective earthing
terminal on the chassis. See
"QFX10002 Chassis Grounding Cable and Lug Specifications" on page
Figure 36 on page 107.
101.
106