Qfx10002 Component Redundancy - Juniper QFX10002 Hardware Manual

Table 3: QFX10002 Hardware Components
Component Spare Juniper Model Number
Chassis QFX10002-72Q-CHAS-S
JNP10002-60C
QFX10002-36Q-CHAS-S
Fan module QFX10002-FAN-S
JNP10002-FAN1
Power supplies JPSU-1600W-AC-AFO
JPSU-1600W-DC-AFO

QFX10002 Component Redundancy

The following hardware components provide redundancy on QFX10002 models:
• Power supplies
As shown in Table 4 on page
DC input power supply or a single AC input power supply for 220VAC operation. A minimum of two
AC power supplies are required to operate the QFX10002-72Q and QFX10002-60C at 110VAC. The
QFX1002-36Q can operate with a single DC input power supply or it can operate with a single AC
power supply at 110VAC and 220VAC.
CAUTION: When running the switch in non-redundant mode, install a power supply
cover (QFX10002-PWR-BLNK) in any unused power bays for safety, cooling, and
emissions control.
CLI Output
QFX10002-72Q
QFX10002-60C
QFX10002-36Q
QFX10002-xxx Fan Tray
QFX10002-72Q and QFX10002-36Q
QFX10002-60C Fan Tray, Front to Back Airflow - AFO
AC AFO 1600W PSU
QFX10002-36Q
DC AFO 1600W PSU
QFX10002-36Q
AC AFO 1600W PSU
9, the QFX10002-72Q and QFX10002-60C can operate with a single
n , Front to Back Airflow - AFO
for QFX10002-72Q and
for QFX10002-72Q and
for QFX10002-60C
8
for