Table of Contents
Advertisement
TalkAnytime User Guide
Field Name
T1/E1/ISDN
Long-Haul
Mode
CRC Check
(Cyclic
Redundancy
Check)
Frame Format
CAS Protocol
FXS Options –
No Response
Timer
E1 Parameter Definitions
Values
Description
E1
European standard.
Y/N
In Long-Haul Mode, the
recovers received signals as low as –36 dB. The maximum
reachable length with 22 AWG cable is 2000 meters. When
Long-Haul Mode is disabled, signals as low as –10 dB can
be received.
Default: disabled.
--
Not applicable to E1.
Frame Format of TalkAnytime should match that used by
Double Frame;
PBX or telco.
MultiFrame
(with CRC4);
MultiFrame
(w/CRC4,
modified)
E&M Immed Strt
Channel Associated Signaling (CAS) is a method of
E&M Wink Start
incorporating telephony signaling info into an E1
voice/data stream. In CAS, the signaling bits (the A, B, C,
E&M Wink with
and D bits) are multiplexed into the signal stream of each
dial tone
E1 channel. (By contrast, in Common Channel Signaling
FXO Ground Strt
(CCS), one channel handles signaling for all other
FXO Loop Start
channels.) Each CAS protocol defines the states of the
FXS Ground Strt
signaling bits during the various stages of a call (IDLE,
FXS Loop Start
SEIZED, ANSWER, RING-ON, RING-OFF).
MFR2ITU
MFR2 China
The CAS protocol code allows the VOIP to interact
MFR2 ANI
properly with the PBX or central-office switch that it
serves. The need to download CAS protocols arises for
only a small minority of VOIP users, and only when
PBX/switch is found to be incompatible with standard
protocols.
Match this parameter to the setting of PBX or central-office
switch.
1 – 65535
Length of time before call connection attempt is
(in seconds)
abandoned. Applicable only when FXS Loop Start or FXS
Ground Start is selected as the CAS protocol.
97
Technical Configuration
TalkAnytime
automatically
Advertisement
Table of Contents
