Multitech TalkAnytime TA2410 User Manual page 83

TalkAnytime User Guide
The Voice/FAX Parameters fields are described in the tables below.
Field Name
Default
Select
Channel
Copy
Channel
Voice Gain
Input Gain
Output Gain
DTMF Parameters
DTMF Gain
DTMF Gain,
High Tones
DTMF Gain,
Low Tones
DTMF
In/Out of
Band
FAX/Modem Parameters
Voice/Fax Parameter Definitions
Values Description
-- When this button is clicked, all Voice/FAX parameters are set to their
default values.
Channel to be configured is selected here.
1-24 (2410)
1-30 (3010)
-- Copies the Voice/FAX attributes of one channel to another channel.
Attributes can be copied to multiple channels or all channels at once.
-- Signal amplification (or attenuation) in dB.
+31dB Modifies audio level entering voice channel before it is sent over the
to network to the remote VOIP. The default & recommended value is 0 dB.
–31dB
+31dB Modifies audio level being output to the device attached to the voice
to channel. The default and recommended value is 0 dB.
–31dB
-- The DTMF Gain (Dual Tone Multi-Frequency) controls the volume level
of the DTMF tones sent out for Touch-Tone dialing.
+3dB to Default value: -4 dB. Not to be changed except under supervision of
-31dB & MultiTech's Technical Support.
"mute"
+3dB to Default value: -7 dB. Not to be changed except under supervision of
-31dB & MultiTech's Technical Support.
"mute"
Out of
When DTMF is set to Inband, the DTMF digits are passed through the
Band, or
TalkAnytime unit as they are received. In MultiVOIP products, which are related
Inband
to the TalkAnytime unit, DTMF can also be set to Out of Band. In such cases, the
TalkAnytime unit detects DTMF tones at its input and regenerates them at its
output.
Not applicable to TalkAnytime.
83
Technical Configuration