Field Description - Multitech TalkAnytime TA2410 User Manual

Click-to-talk media server voice/ip gateways
Hide thumbs Also See for TalkAnytime TA2410:
Table of Contents

Advertisement

TalkAnytime User Guide
Field
Description
Total bytes sent in call.
Bytes
Sent
Packets lost in call.
Packets
Lost
Outbound
The DTMF dialing digits
Digits
received by this gateway from
Received
the remote gateway
presuming that DTMF is set to
"Out of Band."
Successful or unsuccessful.
Call
Status
Indicates call's originating
Call
Direction
party.
The IP address of the traffic
Server
Details
control server (if any) being
used (whether an H.323
gatekeeper, a SIP proxy, or an
SPP registrar gateway) will be
displayed here if the call is
handled through that server.
Indicates whether the call was disconnected simply because the desired conversation was done or
Disconnect
Reason
some other irregular cause occasioned disconnection (e.g., a technical error or failure). Values are
"Normal" and "Local" disconnection.
Field
Gateway
Number
IP Addr
Descript
Options
"Custom Fields" Definitions (cont'd)
"Custom Fields" Definitions (cont'd)
Description
From Details
Originating gateway
IP address where call
originated.
Identifier of site where call
originated.
When
, log will not
selected
Silence Compression and
Forward Error Correction by
call originator.
Field
Description
Total bytes received in call.
Bytes
Received
Voice Coder /Compression Rate used for call will
Coder
be listed in log.
When selected, the phonebook prefix matched in
Prefix
Matched
processing the call will be listed in log.
Indicates the Call Signaling protocol used for the
Call Type
call (H.323, SIP, or SPP apply to MultiVOIP units;
TalkAnytime uses a proprietary protocol).
Indicates whether the DTMF dialing digits are
DTMF
Capability
carried "Inband" or "Out of Band." The
corresponding field values differ for the 3
different voip protocols.
For H.323, this field can display "Out of Band" or
"Inband". For SIP it can display either "Out of
Band RFC2833" or "Out of Band SIP INFO" to
indicate the out-of-band condition or "Inband" to
indicate the in-band condition. For SPP it can
display "Out of Band RFC2833" or "Inband".
The dialing digits sent by this gateway to the
Outbound
Digits Sent
remote gateway presuming that DTMF is set to
"Out of Band."
Field
Description
Completing or answering gateway
Gatew N.
IP address where call was completed or answered.
IP Addr
Identifier of site where call was completed or
Descript
answered.
When selected, log will not use Silence
Options
Compression and Forward Error Correction by
party answering call.
115
Technical Configuration
To Details

Advertisement

Table of Contents
loading

This manual is also suitable for:

Talkanytime ta3010

Table of Contents