Table of Contents
Advertisement
TalkAnytime User Guide
3. You will be prompted to confirm that you want to establish a password, which will entail rebooting the
TalkAnytime (which is done automatically).
Click OK to proceed with establishing a password.
4. The Password screen will appear. If you intend to use the FTP Server function that is built into the
TalkAnytime, enter a user name. (A User Name is not needed to access the local Windows GUI, the web
browser GUI, or the commands in the Program group.) Type your password in the Password field of the
Password screen. Type this same password again in the Confirm Password field to verify the password
you have chosen.
NOTE: Be sure to write down your password in a convenient but secure place. If the password is
forgotten, contact MultiTech Technical Support for advice.
Click OK.
5. A message will appear indicating that a password has been set successfully.
After the password has been set successfully, the TalkAnytime will re-boot itself and, in so doing, its
BOOT LED will light up.
183
Operation & Maintenance
Advertisement
Table of Contents
