Technical Configuration
T1 Telephony Parameters (for TA2410)
The following parameters must be known about the PBX or telco central office equipment to which the T1
TalkAnytime unit will connect:
T1 Phone Parameters
Ask phone company or
PBX maintainer.
• Which frame format is used?
• Which CAS or PRI protocol is used? ______________
• Clocking: Does the PBX or telco switch use
internal
Note that the setting used in the TalkAnytime unit will
be the opposite of the setting used by the telco/PBX.
• Which line coding is used?
Write down the values for these T1 parameters. You will need to enter these values in the "T1/E1/ISDN
Parameters" screen in the Configuration section of the TalkAnytime software.
Info needed to operate:
T1 Parameters:
Record for this
TalkAnytime unit.
___ or
ESF
or
clocking? _________________
external
___ or
AMI
TA2410
___
D4
___
B8ZS
68
TalkAnytime User Guide