Table of Contents
Advertisement
TalkAnytime User Guide
Field Name
General E1/E1/ISDN Parameters
Line Build Out
Pulse Shape
Level
Caller ID Parameters
Caller ID
Enable
Calling
Number Prefix
(Caller ID)
Calling
Number Suffix
(Caller ID)
Flash Hook Parameters
Detect Flash
Hook
Detection Time
Generation
Time
Clocking
E1 Parameter Definitions (cont'd)
Values
Description
0 dB, -7.5 dB,
To reduce the crosstalk on received signals, a transmit
-15 dB, -22.5 dB
attenuator can be placed in the data path. Transmit
attenuation is selectable. Default: O dB
Refers to length of cable between TalkAnytime and
0 to 40 Meters
PBX/telco in meters. Most common will be 0 to 40m.
40 to 81 m
81 to 122 m
122 to 162 m
162 to 200 m
Not supported for TalkAnytime.
Y/N
Turns Caller ID feature on (if checked) and off (if unchecked).
0-9, *, #
A DTMF symbol used to mark the beginning of the calling party
number for use with Caller ID. Maximum length: 4 characters.
0-9, *, #
A DTMF symbol used to mark the end of the calling party
number for use with Caller ID.
Not supported for TalkAnytime.
Y/N
This setting determines whether or not the MultiVOIP
responds to hook-flash signals.
100 – 1500
Minimum hook-flash time that will be interpreted as a valid
milliseconds
flash by the MultiVOIP.
100 – 1500
In some systems, a MultiVOIP might receive a hook-flash signal from
an upstream device (a PBX, voip or other device) and must replicate
milliseconds
it to a downstream device. This parameter determines the duration
of the hook-flash signal that is passed to a downstream device.
External/Internal
Set opposite to telco/PBX setting. Example: if telco clocking
internal, set VOIP clocking as external.
101
Technical Configuration
Maximum length: 4 characters.
Advertisement
Table of Contents
