Technical Configuration
Local Configuration Procedure (Detailed)
You can begin the configuration process as a continuation of the TalkAnytime software installation. You
can establish your configuration or modify it at any time by launching the TalkAnytime program from the
Windows Start menu.
1. Check Power and Cabling. Be sure the TalkAnytime unit is turned on and connected to the computer
via the TalkAnytime unit's Console Port (RJ45 connector is connected at the TalkAnytime unit; DB9
connector is connected at the computer's COM port; if the computer has only USB2.0 ports and no serial
ports, use a USB2.0-to-serial adaptor).
2. Start TalkAnytime Configuration Program. Launch the TalkAnytime program from the Windows Start
menu (from the folder location determined during installation).
72
TalkAnytime User Guide