Multitech TalkAnytime TA2410 User Manual page 94

Technical Configuration
Field Name
General T1/E1/ISDN Parameters
Line Build Out
Pulse Shape
Level
Caller ID Parameters
Caller ID
Enable
Calling
Number Prefix
(Caller ID)
Calling
Number Suffix
(Caller ID)
Flash Hook Parameters
Detect Flash
Hook
Detection Time
Generation
Time
Clocking
T1 Parameter Definitions (cont'd)
Values Description
0 dB, -7.5 dB, To reduce the crosstalk on received signals, a transmit
-15 dB, -22.5 dB attenuator can be placed in the data path. Transmit
attenuation is selectable. Default: O dB
Refers to length of cable between TalkAnytime and
0 to 40 Meters
PBX/telco in meters. Most common will be 0 to 40m.
40 to 81 m
81 to 122 m
122 to 162 m
162 to 200 m
Not applicable to TalkAnytime.
Y/N Turns Caller ID feature on (if checked) and off (if
unchecked).
0-9, *, #
A DTMF symbol used to mark the beginning of the calling party
number for use with Caller ID. Maximum length: 4 characters.
0-9, *, # A DTMF symbol used to mark the end of the calling party
number for use with Caller ID.
Not applicable to TalkAnytime.
Y/N This setting determines whether or not the MultiVOIP
responds to hook-flash signals.
100 – 1500 Minimum hook-flash time that will be interpreted as a valid
milliseconds flash by the MultiVOIP.
100 – 1500
In some systems, a MultiVOIP might receive a hook-flash signal
milliseconds
from an upstream device (a PBX, voip or other device) and must
replicate it to a downstream device. This parameter determines the
duration of the hook-flash signal that is passed to a downstream
device.
External/Internal
Set opposite to telco/PBX setting. Example: if telco clocking
internal, set VOIP clocking as external.
Maximum length: 4 characters.
94
TalkAnytime User Guide