Table of Contents
Advertisement
Technical Configuration
Field Name
Enable
Console
Messages
Filters (button)
Turn Off Logs
Logs Buttons
GUI
SMTP
SysLog Server
Enable
IP Address
Port
Online Statistics
Updation
Interval
"Logs" Screen Definitions
Values
Description
Y/N
Allows TalkAnytime debugging messages to be read via a basic terminal
program like HyperTerminal ™ or equivalent. Normally, this should be
disabled because it uses TalkAnytime processing resources. Console messages
are meant for tech support personnel.
Click to access secondary screen on where console messages can be
included/excluded by category and on a per-channel basis. (See the Console
Messages Filter Settings screen on subsequent page.)
Y/N
Check to disable log-reporting function.
Only one of two log reporting methods, GUI or SMTP, may be chosen.
Y/N
User must view logs at the TalkAnytime configuration program.
Y/N
Log messages will be sent to user-specified email address.
Y/N
This box must be checked if logging is to be done in conjunction with a SysLog
Server program. For more on SysLog Server, see Operation & Maintenance
chapter.
n.n.n.n
IP address of computer, connected to TalkAnytime network, on which SysLog
for n=
Server program is running.
0-255
514
Logical port for SysLog Server. 514 is commonly used.
integer
Set the interval (in seconds) at which logging information will be updated.
118
TalkAnytime User Guide
Advertisement
Table of Contents
