Table of Contents
Advertisement
URL Configuration
TalkAnytime URL Configuration
End users will access the TalkAnytime by clicking on an icon on a web site. The web server must include a
URL link expression that not only directs the caller to the TalkAnytime unit but also specifies values for
several other parameters (four parameters are required; two are optional).
The general form of the URL expression is as follows:
TalkAnytime URL Command Line
http://a.b.c.d/tat.cgi?Service=string1&Protocol=n&Codec=q&SC=w
&Packetization=y&Digits=z
Configuration
Parameter
Involved
TalkAnytime
where a, b, c, and d are
IP Address
the IP address octet
numbers;
Values: 0 to 255
Service
where string1 is a variable;
Values: any
letters/numbers;
no spaces, periods,
commas, or symbols;
40 characters max.
Protocol
where n is a variable;
Values: TCP or UDP
Codec
where q is a variable;
Values: G711A, G711U,
G723
Silence
where w is a variable;
Compression
Values: ON, OFF
Portion of URL in
question
This value must match the
value of the Description
field in the Inbound
Phonebook.
Optional parameter. If
omitted, remove the entire
expression "&SC=w" from
URL.
TalkAnytime Quick Start Instructions
Comment
34
Advertisement
Table of Contents
