Table of Contents
Advertisement
TalkAnytime User Guide
5. Push the expansion card fully into the chassis. See Figure C-3.
Secure the vertical plate of the expansion card to the chassis with a screw.
Operation
The TA-2410/3010 front panel has two sets of identical LEDs. In the TA-2410/3010 without an expansion
card, only the left-hand set of LEDs is functional. However, when the TalkAnytime unit has been upgraded
with an TA24-48 or TA30-60 expansion card, the right-hand set of LEDs will also become active.
Remember that the expansion card must be configured as though it were simply another complete
TalkAnytime unit: it requires its own T1/E1 line; it requires its own connection to a computer running the
TalkAnytime configuration software. All of the procedures and operations that apply to the original
motherboard of the TA-2410/3010 will also apply to the expansion card. See applicable User Guide
chapters for details.
Figure C-3: Sliding Expansion Card into Chassis
221
Expansion Cards
Advertisement
Table of Contents
