Chapter 1 - Basic Faxfinder Configuration; Faxfinder Hybrid Mode; Upgrading Ffx40 For Ip Capability; Upgrading Ff240-Ip For Analog Capability - Multitech FaxFinder FF240-IP Administrator's Manual

Hide thumbs Also See for FaxFinder FF240-IP:
Table of Contents

Advertisement

BASIC FAXFINDER CONFIGURATION
Chapter 1 – Basic FaxFinder Configuration

FaxFinder Hybrid Mode

FaxFinder enables users to operate in a hybrid mode with the option to add IP capability or analog modems to the
base FaxFinder unit.
See

Upgrading FF240-IP for Analog Capability

See

Upgrading FFx40 for IP Capability

Upgrading FFx40 for IP Capability
Perform this procedure to add IP capability to your FFx40 device.
Before you start:
Update the FaxFinder software to version 5.0.5.3 or greater. Refer to
information.
Purchase channel upgrades (up to 24 channels).
1.
Go to System Configuration > Software Update.
2.
Under License Upgrade, enter the new license key in the Current License Key field.
3.
Click Upgrade License.
4.
Restart FaxFinder with the link provided.
5.
Go to Fax Configuration > Fax Provider.
6.
Configure the SIP and T.38 parameters required by your IP network. Refer to
parameter information.
7.
Click Save to save all changes.
Upgrading FF240-IP for Analog Capability
Complete the following steps to add analog capability to your FF240-IP device.
1.
Update the FaxFinder software to version 5.0.5.3 or greater. Refer to
instructions.
2.
Power off the FaxFinder.
3.
Cable the FaxFinder Expansion Module to the FaxFinder. Refer to Cabling a FaxFinder Expansion Module
to FaxFinder in Specifications and Regulatory Information for instructions.
4.
The FaxFinder autodetects the FaxFinder Expansion Module. To verify this:
a.
Go to Fax Configuration. Modem should appear at the top of the menu.
b.
Go to Fax Configuration > Inbound Routing. Lines should appear between Global Routing and
Default Routing.

Configuring FaxFinder's IP Address and Network Settings

To configure the FaxFinder's IP address:
1.
Set the admin computer to startup IP address.
8
to add analog capability to the device.
to add IP capability to the device.
®
FaxFinder
Fax Server FF240-IP, FF240, FF440, FF840 Administrator Guide
Updating Faxfinder Software
Configuring SIP and T.38
Updating FaxFinder Software
for more
for
for

Advertisement

Table of Contents
loading

This manual is also suitable for:

Faxfinder ff240Faxfinder ff440Faxfinder ff840Ff240-ipFf240Ff440 ... Show all

Table of Contents