Table of Contents
Advertisement
TalkAnytime Quick Start Instructions
TalkAnytime URL Configuration
End users will access the TalkAnytime by clicking on an icon on a web site. The web server must include a
URL link expression that not only directs the caller to the TalkAnytime unit but also specifies values for
several other parameters (four parameters are required; two are optional).
The general form of the URL expression is as follows:
TalkAnytime URL Command Line
http://a.b.c.d/tat.cgi?Service=string1&Protocol=n&Codec=q&SC=w
&Packetization=y&Digits=z
Configuration
Parameter
Involved
TalkAnytime
where a, b, c, and d are
IP Address
variables;
Values: 0 to 255
Service
where string1 is a variable;
Values: any
letters/numbers;
no spaces, periods,
commas, or symbols;
40 characters max.
Protocol
where n is a variable;
Values: TCP or UDP
Codec
where q is a variable;
Values: G711A, G711U,
G723
Silence
where w is a variable;
Compression
Values: ON, OFF
Packetization
where y is a variable;
Values: 30, 60, 90, 120
Digits
where z is a variable;
Values: Yes, No
allowed variant
tatfrm.cgi?
of tat.cgi?
Note:
All non-italicized characters in the URL expression are fixed literal characters that
must be included verbatim. As noted above, the tat.cgi? expression has an
allowed variant.
Use of phonebook entries and URL command lines is illustrated in the
that follows.
Multi-Tech Systems, Inc.
Portion of URL in
question
This value must match the value of the
Description field in the Inbound Phonebook.
Optional parameter. If omitted, remove the
entire expression "SC=w" from URL.
Optional parameter. If omitted, remove the entire
expression "Packetization=y" from URL.
When Digits=No, the end user can use the
TalkAnytime keypad to dial only after connection
has been made. When Digits=Yes, TalkAnytime
keypad is available immediately.
Eliminates black background behind TalkAnytime
user screen.
TalkAnyTime User Guide
Comment
TalkAnytime System Examples
URL Configuration
section
26
Advertisement
Table of Contents
