APRILIA RSV4 Factory a-PRC 2009 Service Station Manual page 446

Screw the nut.

Refit the chain on the drive pinion

APPLY LOCTITE ANTI-SEIZE ON THE INTERNAL TOOTH-

ING OF THE TRANSMISSION PINION.

Fit the pinion and the chain on the shaft.

APPLY LOCTITE 243 ON THE SCREW THREAD.

Fit the washer on the screw

Tighten the screw.

Install the rear shock absorber and the

Fit the rear brake calliper plate.

Fasten the two pipe grommets on the

RSV4 Factory a-PRC