APRILIA RSV4 Factory a-PRC 2009 Service Station Manual page 444

Refit the swingarm height adjustment inserts if removed, bearing in mind that the arrow must

face upward.

PAY PARTICULAR ATTENTION TO THE DIRECTION OF THE INSERTS WHEN REFITTING. IN-

CORRECT ASSEMBLY MAY CAUSE SEVERE DAMAGE TO THE VEHICLE. THE ARROW MUST

FACE UPWARD.

Spread a thin layer of lubricating

grease all along the swingarm pin.

Fit the adjustment bushing (3) to its

seat and tighten it manually.

THE ADJUSTMENT BUSHING (3) MUST NOT PROTRUDE

BEYOND THE CHASSIS INTERNAL EDGE.

Place a wooden support under the

front of the swingarm to prevent it from

dropping and hold in position.

Support the swingarm from the front;

move it into position so that the holes

are aligned and simultaneously insert

the pin (2) fully.

RSV4 Factory a-PRC