APRILIA RSV4 Factory a-PRC 2009 Service Station Manual page 280

Tighten the selector drum screw.

Insert the driving pin on the oil pump

Install the water/oil pump control gear.

Insert the Seeger ring.

Install the gear sensor, making the pin

coincide with the slot on the desmo-

dromic control rod.

Gear selector

Removing the gear selector

Drain the engine oil.

Remove the clutch cover.

Working from the clutch side, remove

the selector control shaft.

Remove the gear locking pawl and re-

trieve the washer and the spring.

RSV4 Factory a-PRC