Advertisement
Engine
If deformations or broken material are found on the
sliding surface, replace the freewheel gear (2).
Check the freewheel sliding surface (2) for wear.
Make sure that the woodruff key slot is in perfect
condition.
Remove the needle cage (3) and the roller cage (4) from their housings on the freewheel (2) and check
the rollers/needles for wear.
Check for wear on the freewheel sliding surface (2).
Fitting the idle gear
NOTE
BE CAREFUL IN MAINTAINING THE CORRECT GEAR RATIO, FOLLOWING THAT INDICATED IN
THE TABLE.
Model
MY 2009/2010 - "V4"
From the beginning of
marking
production at No. 7419
MY 2010 - "V4" marking
From No. 7420 to No.
MY 2011 - "V4-A" mark-
From the beginning of
ing
production at No. 1003
MY 2011 - "V4-A" mark-
From No. 1004 onwards
ing
ENG - 284
M
OTOR AND GEAR
Engine No.
Starter motor
Denso
Mitsuba
8922
Mitsuba
Denso
RSV4 Factory a-PRC
Transmission
Freewheel gear
Z=12/64
Z=12/64
Z=12/64
Z=12/64
Z=49
Z=49
Z=49
Z=49
Advertisement
