Engine
•
Install the clutch hub cam tower.
•
Position the clutch hub.
HOUSE THE THREE CLUTCH HUB CAMS IN THE SPECIFIC
CLUTCH HUB CAM TOWER INCLINES.
•
The slipper springs are distinguishable
by the cleats. In the 0.8mm spring (1)
there is only one notch, while in the
0.9mm spring (2) there are two notch-
es.
First assembly solution
Model - Engine
Spring No. -
No.
Thickness
My2009/2010 - All
3 - 0.8 mm
engines
My2011 - up to No.
3 - 0.8 mm
3637
My2011 - from No.
2 - 0.9 mm
3638
CAUTION
ONCE THE SPRINGS HAVE BEEN RECEIVED BY THE SPARE PARTS, VERIFY THE THICKNESS
TO CHOOSE THE RIGHT COMBINATION AS IN THE TABLE
ENG - 298
S
LIPPER SPRINGS
-
Washer -
Spring No. - Thickness
Thickness
NO
3 - 0.8 mm
Alternatively
NO
2 - 0.9 mm
YES - 0.9 mm
2 - 0.9 mm
RSV4 Factory a-PRC
Specific assistance
Washer - Thickness
NO
Alternatively
YES - 0.9 mm
YES - 0.9 mm