RSV4 Factory a-PRC
•
The stop light logic relay (No 25 in the wiring diagram, position in the front niche of the frame,
right side, CHECK, however, the identification of the relay with the colour of the cables) is
energised
Error clearing
Ambient parameter reading
•
Rear throttle target position angle
•
Front throttle target position angle
•
Rear throttle position
•
Front throttle position
•
Engine Temp. before Recovery
•
Rear cylinder mean intake pressure (1 and 3)
•
Front cylinder mean intake pressure (2 and 4)
•
Engine rpm
•
Indicated average torque
•
Engine status - Indefinite_Key ON_Running engine_Stopped_Power latch_Power latch
2_Power latch finished
•
Odometer
•
Mapping selection - Indefinite/Track/Sport/Road
DIAGNOSTICS INSTRUMENT: ELECTRICAL ERRORS
EEPROM Error P0601
•
circuit not operational
Error cause
•
Replace injection ECU. The instrument panel does not indicate the presence of this error
even in the ATT status
RAM Error P0604
•
circuit not operational
Error cause
•
Replace injection ECU. The instrument panel does not indicate the presence of this error
even in the ATT status
ROM Error P0605
•
circuit not operational
Error cause
•
Replace injection ECU. The instrument panel does not indicate the presence of this error
even in the ATT status
A/D converter P0607
Electrical system
ELE SYS - 157