APRILIA RSV4 Factory a-PRC 2009 Service Station Manual page 313

RSV4 Factory a-PRC

Move the gear from the mounting tool

to the camshaft.

Unscrew and remove the two screws

Remove the tool.

Specific tooling

020865Y Support for camshaft gear on head

Fit the U bolt and the oil pipe.

Tighten the two U bolt screws (1) and

the screw (2) that was not fitted previ-

Align the intake camshaft with the spe-

cific hole on the U bolt.

Insert the specified pin.

Specific tooling

020851Y Camshaft timing pin

Apply Loctite 243 thread lock on the

thread of the timing gear fastener

screw. This screw must be replaced at

each reassembly.

Apply and loosely tighten the gear fix-

ing screw on the camshaft.