APRILIA RSV4 Factory a-PRC 2009 Service Station Manual page 286

Removing the flywheel cover

Release the clamp and detach the

Blow-by pipe.

Unscrew and remove the five screws

Unscrew and remove the two screws

Mark the screws (1 - 2) that have dif-

ferent lengths.

Remove the cover together with the

stator and retrieve the two centring

Magneto flywheel removal

THERE ARE TWO DIFFERENT TYPES OF FLY-

WHEEL, MITSUBISHI OR KOKUSAN, IN THIS

ENGINE. THE TWO FLYWHEELS CANNOT BE

INTERCHANGED AS WELL AS THE TOOLS

USED FOR THEIR LOCKING AND REMOVAL.

TOOLS FOR KOKUSAN FLYWHEEL:

Flywheel extractor cod. 020913Y

Flywheel lock cod. 020914Y

TOOLS FOR MITSUBISHI FLYWHEEL

Flywheel extractor cod. 020847Y

Flywheel lock cod. 020848Y

FIND BELOW THE REMOVING AND REFIT-

TING PROCEDURE OF THE MITSUBISHI FLY-

WHEEL, THE SAME PROCEDURE (EXCEPT

FOR TOOLS) IS VALID ALSO FOR KOKUSAN