Chassis And Component Lifting Guidelines; Radiation From Open Port Apertures Warning - Juniper SSR1200 Hardware Manual

Hide thumbs Also See for SSR1200:
Table of Contents

Advertisement

Varning! Rikta inte blicken in mot strålen och titta inte direkt på den genom optiska
instrument.

Chassis and Component Lifting Guidelines

• Before moving the device to a site, ensure that the site meets the power, environmental, and
clearance requirements.
• Before lifting or moving the device, disconnect all external cables and wires.
• As when lifting any heavy object, ensure that most of the weight is borne by your legs rather than
your back. Keep your knees bent and your back relatively straight. Do not twist your body as you lift.
Balance the load evenly and be sure that your footing is firm.
• Use the following lifting guidelines to lift devices and components:
• Up to 39.7 lb (18 kg): One person.
• 39.7 lb (18 kg) to 70.5 lb (32 kg): Two or more people.
• 70.5 lb (32 kg) to 121.2 lb (55 kg): Three or more people.
• Above 121.2 lb (55 kg): Use material handling systems (such as levers, slings, lifts, and so on).
When this is not practical, engage specially trained persons or systems (such as riggers or movers).

Radiation from Open Port Apertures Warning

LASER WARNING: Because invisible radiation might be emitted from the aperture of
the port when no fiber cable is connected, avoid exposure to radiation and do not stare
into open apertures.
Waarschuwing Aangezien onzichtbare straling vanuit de opening van de poort kan
komen als er geen fiberkabel aangesloten is, dient blootstelling aan straling en het kijken
in open openingen vermeden te worden.
Varoitus Koska portin aukosta voi emittoitua näkymätöntä säteilyä, kun kuitukaapelia ei
ole kytkettynä, vältä säteilylle altistumista äläkä katso avoimiin aukkoihin.
66

Advertisement

Table of Contents
loading

Table of Contents