FUEL INJECTOR FUNCTION [LF]
• Injects fuel according to fuel injector control signals from the PCM.
End Of Sie
FUEL INJECTOR CONSTRUCTION/OPERATION [LF]
• Installed on the cylinder head.
• Mainly consists of a coil, spring, needle valve and ball.
• A signal is sent from the PCM causes excitation current to pass through the coil and thereby pull in the needle
valve. Since the ball that opens and closes the injection opening is integrated with the needle valve, it is pulled
together with the needle valve and fuel is injected.
• The amount of injection is determined by the
open time of the needle valve (equal to the
energization time of the coil).
End Of Sie
FUEL PUMP RELAY FUNCTION [LF]
• Controls the fuel pump on/off according to control signals from the PCM.
End Of Sie
01–14–8
FUEL SYSTEM
BALL
NEEDLE VALVE
O-RING
E5U011413250N01
E5U011413250N02
O-RING
COIL
SPRING
C3U0114S111
E5U011400000N06