Checking Oil Level In The Four-Wheel Drive Clutch - Skoda Octavia II 2004 Workshop Manual

Propshaft and rear final drive
Hide thumbs Also See for Octavia II 2004:
Table of Contents

Advertisement

Octavia II 2004 ➤ , Octavia II 2010 ➤ , Superb II 2008 ➤ , Superb II 20 ...
Propshaft and rear final drive - Edition 10.2018
♦ Handbrake warning switch - F9- is defective.
Functional test for closed four-wheel drive clutch
Test conditions:
Before repairing the four-wheel drive clutch, try to determine
the origin of the damage as accurately as possible using the
⇒ Vehicle diagnostic tester in the functions "Targeted fault
finding", "Vehicle self-diagnosis" and "Measuring method".
Oil level in the four-wheel drive clutch is OK.

Checking oil level in the four-wheel drive clutch

⇒ "6.4 Checking oil level in the four-wheel drive clutch",
page 106
.
Correct engine control unit and ABS control unit installed
(check coding and identification number on control units).
For safety reasons, the vehicle must be placed on the lifting
platform in such a way that the wheels have no contact with
the ground.
Proceed carefully when inspecting.
– Raise vehicle ⇒ Maintenance ; Booklet Octavia II .
– Actuate clutch pedal.
– Start engine.
– Engage 2nd gear.
– Pull on the handbrake and slowly apply the clutch.
The engine must now stall.
If the engine has stopped, the four-wheel drive clutch is closed
and functioning OK.
If the engine has not stopped, the four-wheel drive clutch is not
closed.
Possible cause of fault:
♦ Main pressure regulating valve can clamp.
♦ Mechanical fault of the four-wheel drive clutch.
♦ Four-wheel drive control unit - J492- on rear final drive is de‐
fective.
6.3.2
Functional test of IV and V generation
four-wheel drive clutch, final drive 0BR
The four-wheel drive clutch is checked during a test drive with the
⇒ Vehicle diagnostic tester.
Observe safety measures
⇒ "1.2 Safety precautions during road tests in which testing
and measuring equipment is used", page 1
6.4
Checking oil level in the four-wheel drive
clutch
Special tools and workshop equipment required
♦ Catch pan , e.g. -VAS 6208-
Oil specification ⇒ Electronic Catalogue of Original Parts .
– Measure oil temperature ⇒ Vehicle diagnostic tester.
The oil temperature must be between 20 and 40 °C.
106
Rep. gr.39 - Final drive - rear differential
.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents