Skoda Octavia II 2004 Workshop Manual page 24

Octavia II 2004 ➤ , Octavia II 2010 ➤ , Superb II 2008 ➤ , Superb II 20 ...
Propshaft and rear final drive - Edition 10.2018
1.1.3 Summary of components - propshaft, Superb II
1 - Angle gearbox
2 - Screw
❑ for flexible disk at the
front of the propshaft
❑ Replace after disas‐
sembly
❑ 50 Nm + 90°
3 - Flexible disk
❑ Fitting position: the
open side of the heat
shield faces towards the
gearbox.
❑ Removing and installing
⇒ "1.5 Removing and in‐
stalling the front flexible
disk", page 45
4 - Screw
❑ 60 Nm
5 - Propshaft
❑ cannot be separated in
the joint
❑ Removing and installing
⇒ "1.3 Removing and in‐
stalling propshaft", page
26
6 - Screw
❑ 25 Nm
7 - Guide bearing
❑ align free of stress
8 - Screw
❑ for flexible disk at angu‐
lar gearbox
❑ Replace after disassembly
❑ 50 Nm + 90°
9 - Screw
❑ 60 Nm
10 - Flexible disk/oscillation damper
❑ Heat protection points towards propshaft
❑ Removing and installing
11 - Rear final drive
20
Rep. gr.39 - Final drive - rear differential
⇒ "1.6 Removing and installing the rear flexible disk", page 46
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.